Add help and fix problem with Host name set for new clone

The host name ise set as ssh config entry with ssh key, so we use the short name set for the remote host name

README.md

@@ -37,9 +37,12 @@ Planned to get auto fixes for wrong ACL, etc or missing config settings
 A SSH Key has to be generated for each git respository that will be synced and the configuration has to be added to the ssh config file
 
 ```sh
-create_ssh_config.sh [SSH Key name] [repo url full] ([jump proxy])
+create_ssh_config.sh [repo url full] ([jump proxy])
 ```
 
+> [!notice]
+> This will currently output the command to create the SSH key and the host config to add to the ssh config file
+
 ### new_clone.sh
 
 Create a new clone

src/bin/base_setup.sh

@@ -90,6 +90,7 @@ if [ -d "${GIT_WEBHOOK_BASE_FOLDER}" ]; then
 		"${BASE_FOLDER}init.sh" \
 		"${BASE_FOLDER}git_sync.sh" \
 		"${BASE_FOLDER}switch_branch.sh" \
+		"${BASE_FOLDER}create_ssh_config.sh" \
 		"${GIT_WEBHOOK_BASE_FOLDER}${CLONE_SCRIPTS_FOLDER}";
 	cp "${CONFIG_BASE}/webhook.default.cfg" \
 		"${GIT_WEBHOOK_BASE_FOLDER}${CONFIG_FOLDER}";
@@ -99,6 +100,7 @@ if [ -d "${GIT_WEBHOOK_BASE_FOLDER}" ]; then
 		"${BASE_FOLDER}init.sh" \
 		"${BASE_FOLDER}git_sync.sh" \
 		"${BASE_FOLDER}switch_branch.sh" \
+		"${BASE_FOLDER}create_ssh_config.sh" \
 		"${CONFIG_BASE}/webhook.default.cfg";
 	# check config entries missing
 	exit;
@@ -180,6 +182,7 @@ EOF
 		"${BASE_FOLDER}init.sh" \
 		"${BASE_FOLDER}git_sync.sh" \
 		"${BASE_FOLDER}switch_branch.sh" \
+		"${BASE_FOLDER}create_ssh_config.sh" \
 		"${GIT_WEBHOOK_BASE_FOLDER}${CLONE_SCRIPTS_FOLDER}";
 	cp \
 		"${CONFIG_BASE}/webhook.cfg" \
@@ -191,6 +194,7 @@ EOF
 		"${BASE_FOLDER}init.sh" \
 		"${BASE_FOLDER}git_sync.sh" \
 		"${BASE_FOLDER}switch_branch.sh" \
+		"${BASE_FOLDER}create_ssh_config.sh" \
 		"${CONFIG_BASE}/webhook.cfg" \
 		"${CONFIG_BASE}/webhook.default.cfg";
 fi;

src/bin/create_ssh_config.sh

@@ -13,6 +13,10 @@
 
 REPOSITORY="$1";
 JUMP_PROXY="$2";
+if [ "${REPOSITORY}" == "--help" ]; then
+	echo "$0 <Repo.git> [<Jump Proxy>]";
+	exit;
+fi;
 # below are only to skip error
 BRANCH="-"
 
@@ -28,7 +32,9 @@ if [ ! -f "${SSH_CONFIG_BASE}config" ]; then
 fi;
 
 if [[ "${REPOSITORY}" == *":"* ]]; then
-	REMOTE_HOST=$(echo "${REPOSITORY}" | cut -d ":" -f 1);
+	REMOTE_USER_HOST=$(echo "${REPOSITORY}" | cut -d ":" -f 1);
+	REMOTE_HOST=$(echo "${REMOTE_USER_HOST}" | cut -d "@" -f 2);
+	REMOTE_USER=$(echo "${REMOTE_USER_HOST}" | cut -d "@" -f 1);
 else
 	echo "[!] Must set a full repository path with remote host for the repository";
 	error=1;
@@ -59,7 +65,8 @@ fi;
 # SUDO_COMMAND= as base
 # ssh-keygen -t ed25519 -N "" -C "${GIT_REPOSITORY_NAME}" -f "${SSH_CONFIG_BASE}${SSH_KEY_NAME}"
 # must add ".pem" if key name does not end in .pem
-SSH_COMMAND=("${SUDO_COMMAND[@]}" "ssh-keygen" "-t" "ed25519" "-N" "" "-C" "${GIT_REPOSITORY_NAME}" "-f" "${SSH_CONFIG_BASE}${GIT_REPOSITORY_NAME}.pem")
+SSH_COMMAND=("${SUDO_COMMAND[@]}" "ssh-keygen" "-t" "ed25519" "-N" "\"\"" "-C" "${GIT_REPOSITORY_NAME}" "-f" "${SSH_CONFIG_BASE}${GIT_REPOSITORY_NAME}.pem")
+SSH_CONFIG_COMMAND=("${SUDO_COMMAND[@]}" "vim" "${SSH_CONFIG_BASE}config")
 
 # debug output for now
 echo "";
@@ -69,9 +76,11 @@ echo "${SSH_COMMAND[*]}";
 echo "";
 echo "* ADD TO: ${SSH_CONFIG_BASE}config";
 echo "";
-echo "Host ${GIT_REPOSITORY_NAME}":
+echo "${SSH_CONFIG_COMMAND[*]}";
+echo "";
+echo "Host ${GIT_REPOSITORY_NAME}"
 echo "    Hostname ${REMOTE_HOST}";
-echo "    User git";
+echo "    User ${REMOTE_USER}";
 echo "    PreferredAuthentications publickey";
 echo "    IdentityFile ~/.ssh/${GIT_REPOSITORY_NAME}.pem";
 if [ -n "${JUMP_PROXY}" ]; then

src/bin/git_sync.sh

@@ -7,6 +7,10 @@
 REPOSITORY="$1";
 BRANCH="$2";
 REMOTE_NAME="$3";
+if [ "${REPOSITORY}" == "--help" ]; then
+	echo "$0 <Repo.git> <branch> [<remote name, defaults to origin>]";
+	exit;
+fi;
 if [ -z "${REMOTE_NAME}" ]; then
 	REMOTE_NAME="origin"
 fi;

src/bin/new_clone.sh

@@ -11,6 +11,10 @@ BRANCH="$2";
 REMOTE_HOST="$3";
 REPOSITORY_FOLDER="$4"
 REMOTE_NAME="$5";
+if [ "${REPOSITORY}" == "--help" ]; then
+	echo "$0 <Repo.git> <branch> [<override host>] [<target folder>] [<remote name, defaults to origin>]";
+	exit;
+fi;
 if [ -z "${REMOTE_NAME}" ]; then
 	REMOTE_NAME="origin"
 fi;
@@ -22,15 +26,6 @@ if [ -z "${REPOSITORY}" ]; then
 	echo "[!] Must set a repository path";
 	error=1;
 fi;
-# if remote host is empty try to set from repository
-if [ -z "${REMOTE_HOST}" ]; then
-	if [[ "${REPOSITORY}" == *":"* ]]; then
-		REMOTE_HOST=$(echo "${REPOSITORY}" | cut -d ":" -f 1);
-	else
-		echo "[!] Must set a repository path with remote host for the repository";
-		error=1;
-	fi;
-fi;
 # if we have an ":" in the repository, split by it and replace it with the remote host
 if [[ "${REPOSITORY}" == *":"* ]]; then
 	REPOSITORY=$(echo "${REPOSITORY}" | cut -d ":" -f 2);
@@ -41,14 +36,18 @@ if [ -z "${REPOSITORY_FOLDER}" ]; then
 else
 	GIT_REPOSITORY_NAME="${REPOSITORY_FOLDER}";
 fi;
+# set remote host if not set to the ssh config name
+if [ -z "${REMOTE_HOST}" ]; then
+	REMOTE_HOST="${GIT_REPOSITORY_NAME}";
+fi;
 if [ $error -eq 1 ]; then
 	exit;
 fi;
 
 error=0
 echo "* Validate SSH PEM Key exist and SSH config";
-if ! grep "Host ${GIT_REPOSITORY_NAME}" "${GIT_WEBHOOK_BASE_FOLDER}"/.ssh/config; then
-	echo "[!] ssh config entry for Host ${GIT_REPOSITORY_NAME} is missing";
+if ! grep "Host ${REMOTE_HOST}" "${GIT_WEBHOOK_BASE_FOLDER}"/.ssh/config; then
+	echo "[!] ssh config entry for Host ${REMOTE_HOST} is missing";
 	error=1;
 else
 	# make sure the identiy file is there

src/bin/switch_branch.sh

@@ -8,6 +8,10 @@
 REPOSITORY="$1";
 BRANCH="$2";
 REMOTE_NAME="$3";
+if [ "${REPOSITORY}" == "--help" ]; then
+	echo "$0 <Repo.git> <branch> [<remote name, defaults to origin>]";
+	exit;
+fi;
 if [ -z "${REMOTE_NAME}" ]; then
 	REMOTE_NAME="origin"
 fi;